Car heating warm-up system for Citroen C3 (FC) 01.2002 - 07.2005
Car heating warm-up system for Citroen C3 (FC)
- Standard catalogue
- New catalog (7 products)
Power:
Dimensions:
Lenght:
All filters
Power consumption:
Connector diameter:
7 products more in new catalogue
NB! 7 more products found in the new catalog
Results found: 10
ENGINE HEATER TT-THERMO 1000XC ( READY-TO-INSTALL)
Item code:
AL51314717
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
803.25-12%702.98 myr -
-
803.25 - Price with discount
- 702.98 myr
-
- You save 100.26 myr (-12%)
-
- in the store
- 3 pcs
-
date of dispatch:
22.05.2024, 18:00
- Add to cart
READ MORE
-Heater intended for 4-6 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
Splashproof connection cable
Item code:
AL14332844
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
149.58-13%129.84 myr -
-
149.58 - Price with discount
- 129.84 myr
-
- You save 19.73 myr (-13%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
22.05.2024, 18:00
- Add to cart
Connector: |
|
Current: |
Max 16A
|
Lenght: |
1,5M
|
Voltage: |
AC 220-240 V
|
READ MORE |
DEFA PlugIn connectors do not require any tools to make a safe connection. Therefore, you can install them without the help of a qualified electrician.
cable 1.5m
Defa compatible heating cable - Locking fork connection
Item code:
AL33773500
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
191.25 myr
- Price: 191.25 myr
-
- can be ordered
- 5 pcs
-
date of dispatch:
22.05.2024, 18:00
- Add to cart
READ MORE
Defa compatible instrument socket / element cable - Defa compatible heating cable - Locking fork connection
ENGINE HEATER TT-THERMO 500XC ( READY-TO-INSTALL)
Item code:
AL73974230
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
707.62-12%623.67 myr -
-
707.62 - Price with discount
- 623.67 myr
-
- You save 83.94 myr (-12%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
22.05.2024, 18:00
- Add to cart
READ MORE
-Heater intended for 1-3 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1000XC
Item code:
AL33724026
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
760.76-14%654.27 myr -
-
760.76 - Price with discount
- 654.27 myr
-
- You save 106.48 myr (-14%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
22.05.2024, 18:00
- Add to cart
Power: |
1000 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Pump throughput capacity: |
8 l/min
|
Power consumption: | ALL PROPERTIES |
Power consumption: |
4,3 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
READ MORE |
A device that allows you to warm up the engine without starting it. Designed to preheat the engine, to facilitate starting the engine in cold weather and, in some cases, to warm the air in the vehicle cabin.
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1000 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1500XC ( READY-TO-INSTALL
Item code:
AL51314719
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
794.73-12%695.53 myr -
-
794.73 - Price with discount
- 695.53 myr
-
- You save 99.19 myr (-12%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
22.05.2024, 18:00
- Add to cart
READ MORE
-Heater intended for 6+ cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1500XC
Item code:
AL30750421
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
801.56-12%707.31 myr -
-
801.56 - Price with discount
- 707.31 myr
-
- You save 94.24 myr (-12%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
22.05.2024, 18:00
- Add to cart
Power: |
1500 W
|
Dimensions: |
151 mm x 90 mm x 75 mm
|
Lenght: |
151 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Weight: | ALL PROPERTIES |
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
READ MORE |
The genuine and original TT-Thermo engine heater is suitable for almost all motor vehicles!
New generation hose heater with circulating water pump. Power 1500W
Externally more compact in size than previous Kld2 models
Our only model that is completely free to install in any position. No limited mounting angle or position
The resistors inside the heat exchanger are not directly in the liquid, so the resistors do not burn from the air bubbles in the system
Pump bearings reinforced and improved
Improved pump performance
All experiences of previous models have been taken into account in the design
Higher quality materials and components
Designed in Finland
Defa compatible connector
Hose outlet diameter 17mm
You can find the hose bends that may be needed for installation in our online store
Forget the inefficient engine heater!
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-THERMO 2200XC 18mm
Item code:
AL51314701
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
840.63 myr
- Price: 840.63 myr
-
- can be ordered
- 5 pcs
-
date of dispatch:
22.05.2024, 18:00
- Add to cart
READ MORE
Designed for large machines such as work vehicles, trucks, etc.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-THERMO 2200XC 20mm
Item code:
AL35880284
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
960.48-5.9%903.77 myr -
-
960.48 - Price with discount
- 903.77 myr
-
- You save 56.71 myr (-5.9%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
22.05.2024, 18:00
- Add to cart
READ MORE
A new generation hose heater with a circulating water pump. Power 2200W, adjustable angle in connection.
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
Cable Kit, engine preheating system CALIX 1762461
Item code:
AL72276912
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
384.54 myr
- Price: 384.54 myr
-
- can be ordered
- 5 pcs
-
date of dispatch:
22.05.2024, 18:00
- To the new catalogue
See item information in the new catalogue
Cable Kit, engine preheating system DEFA 460785
Item code:
AL12650829
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
400.65 myr
- Price: 400.65 myr
-
- can be ordered
- 2 pcs
-
date of dispatch:
22.05.2024, 18:00
- To the new catalogue
See item information in the new catalogue
Cable Set, interior heating fan, (engine preheating system) CALIX 1760015
Item code:
AL72268892
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
403.46 myr
- Price: 403.46 myr
-
- can be ordered
- 3 pcs
-
date of dispatch:
22.05.2024, 18:00
- To the new catalogue
See item information in the new catalogue
ENGINE HEATER TT-THERMO 1500KLD
Item code:
AL14332360
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
599.25 myr
- Price: 599.25 myr
- in suppliers stock: NOT AVAILABLE
Fluid: |
Coolant, Glycol - G11, G12
|
Power cord: |
DEFA compatible cables
|
Power: |
1500 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: | ALL PROPERTIES |
Connector diameter: |
⏀16 mm -⏀17 mm
|
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
READ MORE |
installation options than the model with a direct hose connection. The connection of the heater to the electricity network is
With a connector compatible with the Defa system. If the need for installation length to the one in the car
to the electric cable system is long, we also have Defa-compatible armored 1.5m available separately
long extension cord.
The operating principle of the heater is simple: it simultaneously heats and circulates the coolant
in the engine. Therefore, the engine heats up evenly everywhere and the vehicle's interior quickly when the vehicle is started.
Thanks to the even heating of the engine, the heater is also excellently suitable for new vehicles that do not
can use a traditional block heater.
The heater is easy to install and reliable. In general, the best place for installation is the water hose between the engine and the interior heater. The heater has a built-in thermostat that keeps the temperature at +65..+75
degree. The pump circulates the heated liquid all the time. In this way, the heat is efficiently transferred to the engine. Thanks to the thermostat, the heater can be turned on without the risk of overheating.
Delivery includes: Engine heater with Defa-compatible connector, water hose clamps, installation and user manual in Finnish.
Deliveries directly from the warehouse of the importer Suomen Tuontiekniikka Oy. Delivery time 2-5 days.
The heater is CE-marked and has a 1-year warranty from the date of purchase.
Technical information:
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 6.2 A
Power cord Defa compatible cables
Pump capacity 8 l/min
Fluid Coolant, Glycol - G11, G12
Dimensions 150 mm x 90 mm x 80 mm
Weight 880 g (without power cord)
Connections Ø 16 mm – shoulder Ø 17 mm
Hoses Internal diameter
Ø 16 mm – 20 mm
All parts for Citroen C3 (FC)
- Body parts
- Bumper
- Under engine cover
- Wing
- Plastic inner fender
- Bumper grill
- Grill
- Sill
- Bumper bracket
- Rear wheel archNEW!
- Bonnet
- Tow hook
- Front panel
- Towing hook plug
- Bumper moulding
- Bumper reinforcement
- Front bumper spoiler
- Fender mouldingNEW!
- Headlamp frame
- Sill repair part
- Front fender reinforcementNEW!
- Door moulding
- Under engine and gearbox cover (steel)
- Rear panel
- Number plate supportNEW!
- Trailer HitchNEW!
- Mounting Kit, mud guardNEW!
- Mounting Kit, bumperNEW!
- DeletedNEW!
- Mounting, mudguard holderNEW!
- Retaining Clip, underbody panellingNEW!
- Number plate base
- Protective foil
- Lighting
- Main headlamp
- Tail light
- Side flasher
- Front fog lamp
- Number plate light
- IndicatorNEW!
- Stop lamp
- Bulb, door puddle lightNEW!
- Daytime running lightNEW!
- Cable Repair Set, headlightNEW!
- Fog lamps with blendesNEW!
- Bulb, reading lightNEW!
- Interior LightNEW!
- Bulb, tail fog lightNEW!
- Cable Repair Set, fog lightNEW!
- Deleted
- Bulb
- Universal tail light
- Braking systems
- Brake padsNEW!
- Brake discNEW!
- Repair Kit, brake caliperNEW!
- Brake CaliperNEW!
- Brake shoes kit, drum brakesNEW!
- Cable, parking brakeNEW!
- Guide Sleeve Kit, brake caliperNEW!
- Brake HoseNEW!
- Repair kit, brake pads
- Brake Master CylinderNEW!
- Wheel brake cylinder
- Brake shoes repair kitNEW!
- Brake Light SwitchNEW!
- Piston, brake caliperNEW!
- Repair Kit, automatic adjustmentNEW!
- Brake drum
- Sensor Ring, ABSNEW!
- Repair Kit, brake master cylinderNEW!
- Vacuum Pump, brake systemNEW!
- Carrier, brake caliperNEW!
- Brake Set, disc brakesNEW!
- Repair Kit, parking brake handle (brake caliper)NEW!
- Guide Sleeve, brake caliperNEW!
- Repair Kit, wheel brake cylinderNEW!
- Adjuster Set, drum brakeNEW!
- Adjuster, drum brakeNEW!
- Brake LinesNEW!
- Brake BoosterNEW!
- Brake ShoeNEW!
- Anti-Squeal Foil, brake pad (back plate)NEW!
- Screw Set, brake discNEW!
- Cable Repair Set, wheel speed sensorNEW!
- Cable, service brakeNEW!
- Brake Set, drum brakesNEW!
- Adjustment/Control Element, parking brakeNEW!
- Cable Set, parking brakeNEW!
- Steering parts
- Control arm
- Stabilizer linkNEW!
- Tie rod endNEW!
- Control arm ball jointNEW!
- Control arm silentblockNEW!
- Stabilizer mountNEW!
- Axial jointNEW!
- Steering rackNEW!
- Power steering pump - remanufacturedNEW!
- Steering bootNEW!
- Repair Kit, wheel suspensionNEW!
- Steering gaiters setNEW!
- Anti-roll Bar Stabiliser KitNEW!
- Suspension repair kitNEW!
- Centre Rod AssemblyNEW!
- Fastening Bolts, control armNEW!
- Mounting, axle beamNEW!
- Spring MountingNEW!
- Repair Kit, tie rodNEW!
- Bump Stop, axle beamNEW!
- Suspension Strut MountingNEW!
- Electrical parts
- Spark PlugNEW!
- Abs sensor
- Fuel pumpNEW!
- Ignition coilNEW!
- Crankshaft position sensor
- Sender Unit, coolant temperatureNEW!
- AlternatorNEW!
- Lambda sensors
- StarterNEW!
- Medalion (version USA)
- Parking sensor
- Sender Unit, oil pressureNEW!
- Air flow sensor
- Boost pressure sensor
- Ignition cablesNEW!
- Brake Light SwitchNEW!
- Alternator RegulatorNEW!
- Switch, reverse lightNEW!
- Temperature Switch, radiator fanNEW!
- Sender Unit, intake air temperatureNEW!
- Sensor, exterior temperatureNEW!
- Control Unit, glow plug systemNEW!
- Sensor, exhaust pressureNEW!
- Knock SensorNEW!
- Sensor, exhaust gas temperatureNEW!
- Idle speed controlerNEW!
- Potentiometer throttle valveNEW!
- Sensor, accelerator pedal positionNEW!
- Holder, carbon brushesNEW!
- Sensor, speedNEW!
- Cable Repair Set, glow plugNEW!
- Sensor, oil temperatureNEW!
- Solenoid Switch, starterNEW!
- Sensor, speed / RPMNEW!
- High pressure pumpNEW!
- Freewheel Gear, starterNEW!
- RPM Sensor, automatic transmissionNEW!
- Carbon Brush, starterNEW!
- Cable Set, parking assistNEW!
- Switch, rear hatch releaseNEW!
- Electric Kit, towbarNEW!
- Sender Unit, fuel tankNEW!
- Plug, coilNEW!
- Sensor, fuel temperatureNEW!
- Water Pump, window cleaningNEW!
- Sender Unit, interior temperatureNEW!
- Hazard Lights RelayNEW!
- Slip Ring, alternatorNEW!
- Rectifier, alternatorNEW!
- Pinion, starterNEW!
- Ignition CableNEW!
- Switch, tailgateNEW!
- Pulley, alternatorNEW!
- Relay, starterNEW!
- Throttle body
- Glow Plug, auxiliary heaterNEW!
- RPM Sensor, engine managementNEW!
- Cable Repair Set, central electricsNEW!
- Switch, brake actuation (engine timing)NEW!
- Actuators
- Cable Repair Set, tail lightNEW!
- Cable Repair Set, parking assistant sensorNEW!
- Shift Valve, automatic transmissionNEW!
- Mounting Kit, engine preheating systemNEW!
- Temperature Switch, air conditioning fanNEW!
- Cap, starter relayNEW!
- Ignition Coil UnitNEW!
- Shift Selector LeverNEW!
- Optical Element, rain sensorNEW!
- Repair Kit, starterNEW!
- Cable Repair Set, interior heating fan, (eng. preheat sys.)NEW!
- Control Unit, window regulatorNEW!
- Assortment, plug housings
- Battery booster/Jump starter
- Battery charger
- Battery testers & chargers
- Car battery
- Electrical appliances
- Fuses set
- Injector
- Inverter
- Jumper cables
- Sender Units/ Sensors
- Thermical parts
- ThermostatNEW!
- Radiator
- Water PumpNEW!
- Interior blower
- AC condenser
- Radiator cap
- Radiator HoseNEW!
- Expansion tank
- Heat blower controller
- AC compressorNEW!
- Radiator fan
- HeaterNEW!
- Intercooler
- Temperature Switch, radiator fanNEW!
- Thermostat bracketNEW!
- Oil cap
- Oil cooler
- Thermostat HousingNEW!
- Coolant TubeNEW!
- DrierNEW!
- Magnetic Clutch, air conditioner compressorNEW!
- Evaporator
- Pressure Switch, air conditioningNEW!
- Gasket, thermostatNEW!
- Expansion valveNEW!
- Level sensorNEW!
- Heater hoseNEW!
- Seal, EGR valveNEW!
- Gasket, thermostat housingNEW!
- Gasket, water pumpNEW!
- Driven Plate, magnetic clutch compressorNEW!
- AntifreezeNEW!
- Heating Element, engine preheater systemNEW!
- High Pressure Line, air conditioningNEW!
- Seal Ring, coolant tubeNEW!
- Pressure switch
- Ventilation actuator
- Temperature Switch, coolant warning lampNEW!
- A/C compressor clutch coil
- Seal, thermal switchNEW!
- Connector, pipesNEW!
- Retaining Spring, coolant flange sealing plugNEW!
- High-/Low Pressure Line, air conditioningNEW!
- Cable Repair Set, interior fan motorNEW!
- Sensor, engine bay temperatureNEW!
- Air conditioning bearing
- Oring set
- R134a
- Engine
- Oil Drain Plug, oil panNEW!
- Gasket, cylinder head coverNEW!
- Gasket, cylinder headNEW!
- Shaft Seal, crankshaft, Shaft Seal, camshaftNEW!
- Gasket Set, cylinder headNEW!
- Bolt Kit, cylinder headNEW!
- Timing Chain KitNEW!
- Gasket, intake manifoldNEW!
- Gasket Set, cylinder head coverNEW!
- Gasket, exhaust manifoldNEW!
- Charger Intake HoseNEW!
- Piston Ring KitNEW!
- Gasket, wet sumpNEW!
- Oil DipstickNEW!
- Belt Pulley, crankshaftNEW!
- Seal Set, valve stemNEW!
- Mounting Kit, chargerNEW!
- Exhaust ValveNEW!
- Big End BearingsNEW!
- Hose, crankcase breatherNEW!
- Valve, engine block breatherNEW!
- Inlet ValveNEW!
- Gasket Set, crank caseNEW!
- Main Bearings, crankshaftNEW!
- Rocker/ TappetNEW!
- Cylinder Head CoverNEW!
- Intake Hose, air filterNEW!
- Sump
- Oil PumpNEW!
- Control Valve, camshaft adjustmentNEW!
- Full Gasket Set, engineNEW!
- Seal, oil filter housingNEW!
- Seal, valve stemNEW!
- Pressure Converter, exhaust controlNEW!
- Valve GuidesNEW!
- Timing ChainNEW!
- Oil level sensorNEW!
- Gasket, intake manifold housingNEW!
- Tensioner, timing chainNEW!
- Gasket, thermostatNEW!
- Finger Follower, engine timingNEW!
- Gasket Set, intake manifoldNEW!
- Gasket Set, oil coolerNEW!
- Oil Trap, crankcase breatherNEW!
- Hose, cylinder head cover breatherNEW!
- Camshaft AdjusterNEW!
- CamshaftNEW!
- Shaft Seal, camshaftNEW!
- Accelerator CableNEW!
- Cooler, exhaust gas recirculationNEW!
- Conrod Bearing SetNEW!
- Chain, oil pump driveNEW!
- Rocker Arm, engine timingNEW!
- Crankshaft Bearing SetNEW!
- Gear, crankshaftNEW!
- PistonNEW!
- Cylinder Head BoltNEW!
- Thrust Washer, crankshaftNEW!
- PipeNEW!
- CHRA Cartridge, chargerNEW!
- Cylinder SleeveNEW!
- Frost PlugNEW!
- Gear, camshaftNEW!
- Intake Manifold, air supplyNEW!
- Oil HoseNEW!
- Housing, oil filterNEW!
- Small End Bushes, connecting rodNEW!
- Repair Set, piston/sleeveNEW!
- Camshaft KitNEW!
- Timing CaseNEW!
- Bolt Set, crankshaft pulleyNEW!
- Shaft Seal Set, engineNEW!
- Accessory Kit, finger followerNEW!
- Shaft Seal, camshaftNEW!
- Rocker Arm Set, engine timingNEW!
- Lubricating Pipe, cam lubricationNEW!
- Seal Ring, O-Ring, cylinder linerNEW!
- Seal, turbine inlet (charger)NEW!
- Seal Kit, injector pumpNEW!
- O-Ring Set, cylinder sleeveNEW!
- Cap, fuel overflowNEW!
- Camshaft Adjuster SetNEW!
- Drive system parts
- Wheel bearing kitNEW!
- CV-jointNEW!
- CV-joint bootNEW!
- Axle shaftNEW!
- Shaft Seal, differentialNEW!
- Bearing, propshaft centre bearingNEW!
- Shaft Seal, wheel hubNEW!
- Shaft Seal, manual transmissionNEW!
- Axle Nut, drive shaftNEW!
- Stub Axle, wheel suspensionNEW!
- Tripod Hub, Drive shaftNEW!
- Protection Lid, wheel hubNEW!
- Cap, wheel bearingNEW!
- Oil Seal, automatic transmissionNEW!
- Oil, all-wheel-drive couplingNEW!
- Selector Lever Module, transmission shiftNEW!
- Ball Stud, clutch controlNEW!
- Clutches
- Clutch KitNEW!
- ReleaserNEW!
- Clutch pump
- FlywheelNEW!
- Slave Cylinder, clutchNEW!
- Clutch CableNEW!
- Clutch DiscNEW!
- Repair Kit, clutch slave cylinderNEW!
- Clutch Pedal PadNEW!
- Clutch Pressure PlateNEW!
- Screw Set, flywheelNEW!
- Switch, clutch controlNEW!
- Release Fork, clutchNEW!
- Guide Tube, clutchNEW!
- Actuator
- Shaft Seal Set, clutchNEW!
- Belts and pulleys
- V-ribbed beltNEW!
- Water Pump & Timing Belt KitNEW!
- Timing BeltNEW!
- Tensioner Pulley, timing beltNEW!
- Deflection/Guide Pulley, v-ribbed beltNEW!
- Tensioner Lever, v-ribbed beltNEW!
- Pulley kit with timing belt
- V-Ribbed Belt SetNEW!
- Alternator pulley
- Belt tensioner
- Vibration Damper, timing beltNEW!
- Timing belt coverNEW!
- V-BeltNEW!
- Pulley BoltNEW!
- Deflection/guide pulley
- Belt Pulley Set, crankshaftNEW!
- Tensioner Pulley, V-beltNEW!
- Pulley set
- Gas springs
- Car interior equipment
- Air intake system parts
- Mounting Kit, chargerNEW!
- Charger, charging system
- Throttle bodyNEW!
- Seal, turbo air hoseNEW!
- Hose, air supplyNEW!
- Accelerator CableNEW!
- Intake Manifold ModuleNEW!
- Gasket, chargerNEW!
- Control Valve, air intakeNEW!
- Boost Pressure Control ValveNEW!
- Oil Pipe, chargerNEW!
- Gasket Set, EGR systemNEW!
- CHRA Cartridge, chargerNEW!
- Assembly Paste, diesel injector / glow plugNEW!
- Secondary Air PumpNEW!
- Threaded Bolt, chargerNEW!
- Seal, throttle bodyNEW!
- Fitting, intake manifoldNEW!
- Control Box, chargerNEW!
- Control Valve, compressorNEW!
- Sensor, differential pressureNEW!
- Cable Repair Set, injector valveNEW!
- Cable Repair Set, crankshaft position sensorNEW!
- Cable Repair Set, intake manifold pressure sensorNEW!
- Repair Kit, chargerNEW!
- Hollow Screw, chargerNEW!
- Switch, clutch control (engine timing)NEW!
- Seal Set, injection systemNEW!
- Cover, injector nozzleNEW!
- Cold-start ValveNEW!
- Cable Repair Set, exhaust gas pressure sensorNEW!
- Fuel system
- Hose, fuel overflowNEW!
- Seal Ring, nozzle holderNEW!
- Breather Valve, fuel tankNEW!
- Accelerator Pump, carburettorNEW!
- Fuel LineNEW!
- Repair Kit, fuel pumpNEW!
- Seal, fuel sender unitNEW!
- Repair Kit, common rail systemNEW!
- Seal, injector holderNEW!
- Seal Ring Set, injectorNEW!
- High Pressure Pipe, injection systemNEW!
- Fuel Drain PlugNEW!
- Housing, fuel filterNEW!
- Holder, fuel filterNEW!
- Seal, fuel tank capNEW!
- Seal Ring, injector shaftNEW!
- Valve, activated carbon filterNEW!
- Charcoal Filter ValveNEW!
- High Pressure Pipe Set, injection systemNEW!
- Fuel Hose
- Exhaust System
- End SilencerNEW!
- Middle SilencerNEW!
- Gasket, exhaust pipeNEW!
- Rubber Strip, exhaust systemNEW!
- Exhaust PipeNEW!
- Catalytic ConverterNEW!
- Clamp, exhaust systemNEW!
- Mounting Kit, chargerNEW!
- Seal, exhaust pipeNEW!
- Soot/Particulate Filter, exhaust systemNEW!
- Bolt, exhaust systemNEW!
- Bracket, EGR valveNEW!
- Rubber Buffer, silencerNEW!
- Front SilencerNEW!
- Spring, silencerNEW!
- Flex Hose, exhaust systemNEW!
- Nut, exhaust manifoldNEW!
- Gasket Set, EGR systemNEW!
- Mounting Kit, silencerNEW!
- Seal, oil outlet (charger)NEW!
- Spring, exhaust pipeNEW!
- CHRA Cartridge, chargerNEW!
- Mounting Kit, catalytic converterNEW!
- Clamp, silencerNEW!
- Pressure Converter, exhaust controlNEW!
- Valve, EGR exhaust controlNEW!
- Gasket Set, exhaust manifoldNEW!
- Holder, exhaust pipeNEW!
- Change-Over Valve, exhaust-gas doorNEW!
- Mounting Kit, soot filterNEW!
- Bolt, exhaust manifoldNEW!
- Cable Repair Set, EGR valveNEW!
- Manifold, exhaust systemNEW!
- Pressure Pipe, pressure sensor (soot/particulate filter)NEW!
- Exhaust TipNEW!
- Fuel system parts
- Fuel cap
- EGR ValveNEW!
- Diesel InjectorNEW!
- Sensor, fuel pressureNEW!
- Knock SensorNEW!
- Throttle bodyNEW!
- Seal Ring, nozzle holderNEW!
- Pressure Converter, exhaust controlNEW!
- Seal Ring, injectorNEW!
- Sensor, exhaust gas temperatureNEW!
- Control Valve, fuel pressureNEW!
- Sensor, accelerator pedal positionNEW!
- Pressure Control Valve, common rail systemNEW!
- Seal Kit, injector nozzleNEW!
- Control Valve, fuel quantity (common rail system)NEW!
- Heat Shield, injection systemNEW!
- Sender Unit, fuel tankNEW!
- Repair Kit, injection nozzleNEW!
- Air Pressure Sensor, height adaptationNEW!
- Fuel PumpNEW!
- Clamps and mounting parts
- Other
- Gasket / SealNEW!
- Holding BracketNEW!
- Engine OilNEW!
- WindscreenNEW!
- Slack AdjusterNEW!
- Side WindowNEW!
- Rear WindscreenNEW!
- Expanding RivetNEW!
- Spacer RingNEW!
- Gasket Set, exhaust systemNEW!
- Actuator, injector pumpNEW!
- O-Ring Repair SetNEW!
- Angle Drive, tacho shaftNEW!
- Axle Bolt, drive shaftNEW!
- Pressure SwitchNEW!
- Automatic Transmission OilNEW!
- Nozzle BodyNEW!
- Pressure Controller, fuel pumpNEW!
- Seal, oil inlet (charger)NEW!
- Automatic Transmission OilNEW!
- BoltNEW!
- Mounting Tools, timing beltNEW!
- Suction Pipe, oil pumpNEW!
- Switch, four wheel driveNEW!
- Suspension StrutNEW!
- O-Ring, cylinder sleeveNEW!
- V-Belt SetNEW!
- Ring Gear, planetary gear (starter)NEW!
- Mounting Kit, doorNEW!
- Repair Kit, exhaust pipeNEW!
- Sensor, fuel tank pressureNEW!
- Fuel GaugeNEW!
- Accessory Kit, rocker armNEW!
- Plug, injectorNEW!
- Cable, automatic transmissionNEW!
- Spring, clutch pedalNEW!
- Bellow, propshaftNEW!
- Parking HeaterNEW!
- Protective Cap, spark plugNEW!
- Air/Electric Horn
- Battery Post Clamp
- Carry Case
- Cover, battery post clamp
- Earth Cable, distributor
- Hand Feed Pump
- Miscellaneous
- Vehicle combination paint
- Heating systems
- Auto chemicals
- Universal bearings
- Chemistry and cosmetic care products
- Accessories
- Accessories
- Accessories for mobile phones
- BOOSTER, Emergency Aid - Battery Bank
- Band hawser
- Car flags
- Car seat covers
- Children's goods
- Cigarette Lighter
- Clamps and ties
- Covers for car documents
- Fan for car
- Fefrigerators and cooling boxes
- Fire extinguisher
- First aid kit
- Flashlights, lamps
- Ice scraper
- Indicators
- Inner tubes
- Insulating Tape
- Interior freshener
- Key Ring Set
- Lamps
- Lamps LED
- Lights XENON
- Mobile phone charger- powerbank
- Multimedia
- Parking assistant system
- Parking clock
- Petrol can
- Pets
- Radio
- Reflective plate
- Roof Box
- Roof Rack
- Rotating Beacon
- Rudder cover
- Safety Goggles
- Spade
- Sponge
- Sticker
- Stickers and car identification
- Tape
- Tint films for car
- Tow Ball Bracket , towbar
- Vacuum Cleaners
- Vehicle Washing Brush
- Warn jacket
- Warning triangle
- Water Can
- Winches
- Wipes
- You may also like
- Heating systems
- Car heating warm-up system
- Car heating warm-up system for Citroen