Sistem Prapemanasan Enjin untuk Nissan PICK UP (D22) 01.2002 - ...
Sistem Prapemanasan Enjin untuk Nissan PICK UP (D22)
- Katalog standard
- Katalog baharu (7 produk)
Power:
Dimensions:
Lenght:
Semua penapis
Power consumption:
Connector diameter:
7 produk lagi dalam katalog baharu
NB! 7 produk lagi ditemui dalam katalog baharu
Hasil ditemui: 10
Sistem Prapemanasan Enjin
Kod item:
AL51314717
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
801.67-12%701.60 myr -
-
801.67 - Harga dengan diskaun
- 701.60 myr
-
- Anda jimat 100.06 myr (-12%)
-
- dalam kedai
- 3 kpg
-
tarikh penghantaran:
23.05.2024, 18:00
- Tambah ke troli
BACA LEBIH LANJUT
-Heater intended for 4-6 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
Sistem Prapemanasan Enjin
Kod item:
AL14332844
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
149.28-13%129.59 myr -
-
149.28 - Harga dengan diskaun
- 129.59 myr
-
- Anda jimat 19.69 myr (-13%)
-
- boleh dipesan
- 5 kpg
-
tarikh penghantaran:
23.05.2024, 18:00
- Tambah ke troli
Connector: |
|
Current: |
Max 16A
|
Lenght: |
1,5M
|
Voltage: |
AC 220-240 V
|
BACA LEBIH LANJUT |
DEFA PlugIn connectors do not require any tools to make a safe connection. Therefore, you can install them without the help of a qualified electrician.
cable 1.5m
Sistem Prapemanasan Enjin
Kod item:
AL33773500
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
190.87 myr
- Harga: 190.87 myr
-
- boleh dipesan
- 5 kpg
-
tarikh penghantaran:
23.05.2024, 18:00
- Tambah ke troli
BACA LEBIH LANJUT
Defa compatible instrument socket / element cable - Defa compatible heating cable - Locking fork connection
Sistem Prapemanasan Enjin
Kod item:
AL73974230
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
706.23-12%622.45 myr -
-
706.23 - Harga dengan diskaun
- 622.45 myr
-
- Anda jimat 83.78 myr (-12%)
-
- boleh dipesan
- 5 kpg
-
tarikh penghantaran:
23.05.2024, 18:00
- Tambah ke troli
BACA LEBIH LANJUT
-Heater intended for 1-3 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
Sistem Prapemanasan Enjin
Kod item:
AL33724026
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
759.27-14%652.99 myr -
-
759.27 - Harga dengan diskaun
- 652.99 myr
-
- Anda jimat 106.27 myr (-14%)
-
- boleh dipesan
- 5 kpg
-
tarikh penghantaran:
23.05.2024, 18:00
- Tambah ke troli
Power: |
1000 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Pump throughput capacity: |
8 l/min
|
Power consumption: | SEMUA CIRI |
Power consumption: |
4,3 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
BACA LEBIH LANJUT |
A device that allows you to warm up the engine without starting it. Designed to preheat the engine, to facilitate starting the engine in cold weather and, in some cases, to warm the air in the vehicle cabin.
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1000 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
Sistem Prapemanasan Enjin
Kod item:
AL51314719
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
793.17-12%694.17 myr -
-
793.17 - Harga dengan diskaun
- 694.17 myr
-
- Anda jimat 99.00 myr (-12%)
-
- boleh dipesan
- 5 kpg
-
tarikh penghantaran:
23.05.2024, 18:00
- Tambah ke troli
BACA LEBIH LANJUT
-Heater intended for 6+ cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
Sistem Prapemanasan Enjin
Kod item:
AL30750421
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
799.99-12%705.93 myr -
-
799.99 - Harga dengan diskaun
- 705.93 myr
-
- Anda jimat 94.06 myr (-12%)
-
- boleh dipesan
- 5 kpg
-
tarikh penghantaran:
23.05.2024, 18:00
- Tambah ke troli
Power: |
1500 W
|
Dimensions: |
151 mm x 90 mm x 75 mm
|
Lenght: |
151 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Weight: | SEMUA CIRI |
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
BACA LEBIH LANJUT |
The genuine and original TT-Thermo engine heater is suitable for almost all motor vehicles!
New generation hose heater with circulating water pump. Power 1500W
Externally more compact in size than previous Kld2 models
Our only model that is completely free to install in any position. No limited mounting angle or position
The resistors inside the heat exchanger are not directly in the liquid, so the resistors do not burn from the air bubbles in the system
Pump bearings reinforced and improved
Improved pump performance
All experiences of previous models have been taken into account in the design
Higher quality materials and components
Designed in Finland
Defa compatible connector
Hose outlet diameter 17mm
You can find the hose bends that may be needed for installation in our online store
Forget the inefficient engine heater!
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
Sistem Prapemanasan Enjin
Kod item:
AL51314701
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
838.98 myr
- Harga: 838.98 myr
-
- boleh dipesan
- 5 kpg
-
tarikh penghantaran:
23.05.2024, 18:00
- Tambah ke troli
BACA LEBIH LANJUT
Designed for large machines such as work vehicles, trucks, etc.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
Sistem Prapemanasan Enjin
Kod item:
AL35880284
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
958.59-5.9%901.99 myr -
-
958.59 - Harga dengan diskaun
- 901.99 myr
-
- Anda jimat 56.60 myr (-5.9%)
-
- boleh dipesan
- 5 kpg
-
tarikh penghantaran:
23.05.2024, 18:00
- Tambah ke troli
BACA LEBIH LANJUT
A new generation hose heater with a circulating water pump. Power 2200W, adjustable angle in connection.
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
Set Kabel, Sistem Prapemanasan Enjin CALIX 1762461
Kod item:
AL72276912
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
383.78 myr
- Harga: 383.78 myr
-
- boleh dipesan
- 5 kpg
-
tarikh penghantaran:
23.05.2024, 18:00
- Ke katalog baharu
Lihat maklumat item dalam katalog baharu
Set Kabel, Sistem Prapemanasan Enjin DEFA 460785
Kod item:
AL12650829
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
399.87 myr
- Harga: 399.87 myr
-
- boleh dipesan
- 2 kpg
-
tarikh penghantaran:
23.05.2024, 18:00
- Ke katalog baharu
Lihat maklumat item dalam katalog baharu
Set Kabel, Kipas Pmnasan Dalaman (Sistem Prapmnasan Enjin) CALIX 1760015
Kod item:
AL72268892
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
402.66 myr
- Harga: 402.66 myr
-
- boleh dipesan
- 3 kpg
-
tarikh penghantaran:
23.05.2024, 18:00
- Ke katalog baharu
Lihat maklumat item dalam katalog baharu
Sistem Prapemanasan Enjin
Kod item:
AL14332360
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
598.07 myr
- Harga: 598.07 myr
- dalam stok pembekal: TIDAK TERSEDIA
Fluid: |
Coolant, Glycol - G11, G12
|
Power cord: |
DEFA compatible cables
|
Power: |
1500 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: | SEMUA CIRI |
Connector diameter: |
⏀16 mm -⏀17 mm
|
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
BACA LEBIH LANJUT |
installation options than the model with a direct hose connection. The connection of the heater to the electricity network is
With a connector compatible with the Defa system. If the need for installation length to the one in the car
to the electric cable system is long, we also have Defa-compatible armored 1.5m available separately
long extension cord.
The operating principle of the heater is simple: it simultaneously heats and circulates the coolant
in the engine. Therefore, the engine heats up evenly everywhere and the vehicle's interior quickly when the vehicle is started.
Thanks to the even heating of the engine, the heater is also excellently suitable for new vehicles that do not
can use a traditional block heater.
The heater is easy to install and reliable. In general, the best place for installation is the water hose between the engine and the interior heater. The heater has a built-in thermostat that keeps the temperature at +65..+75
degree. The pump circulates the heated liquid all the time. In this way, the heat is efficiently transferred to the engine. Thanks to the thermostat, the heater can be turned on without the risk of overheating.
Delivery includes: Engine heater with Defa-compatible connector, water hose clamps, installation and user manual in Finnish.
Deliveries directly from the warehouse of the importer Suomen Tuontiekniikka Oy. Delivery time 2-5 days.
The heater is CE-marked and has a 1-year warranty from the date of purchase.
Technical information:
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 6.2 A
Power cord Defa compatible cables
Pump capacity 8 l/min
Fluid Coolant, Glycol - G11, G12
Dimensions 150 mm x 90 mm x 80 mm
Weight 880 g (without power cord)
Connections Ø 16 mm – shoulder Ø 17 mm
Hoses Internal diameter
Ø 16 mm – 20 mm
Sistem pemanasan untuk Nissan PICK UP (D22)
Semua alat ganti untuk Nissan PICK UP (D22)
- Produk Berdiskaun
- Alat ganti Badan
- Alat ganti cermin dan sambungan
- Sistem brek
- Kasut BrekNEW!
- Cakera BrekNEW!
- Kit Pembaikan, Angkup BrekNEW!
- Angkup BrekNEW!
- Set Kasut BrekNEW!
- Kabel Brek Letak KeretaNEW!
- Set Sarung Pacuan, Angkup BrekNEW!
- Tiub BrekNEW!
- Set Aksesori, Pad Brek CakeraNEW!
- Silinder Brek UtamaNEW!
- Silinder Brek RodaNEW!
- Set Aksesori, Kasut Brek Letak KeretaNEW!
- Omboh, Angkup BrekNEW!
- Suis Lampu BrekNEW!
- Kit Pembaikan, Pelarasan AutomatikNEW!
- Dram BrekNEW!
- Cincin Sensor, ABSNEW!
- Kit Pembaikan, Silinder Brek UtamaNEW!
- Pam Vakum, Sistem BrekNEW!
- Sarung Pacuan, Angkup BrekNEW!
- Set pelaras, brek dramNEW!
- Pemegang, Tiub BrekNEW!
- Penggalak BrekNEW!
- Kasut BrekNEW!
- Tali Keselamatan, Brek OperasiNEW!
- Set Brek, Brek DramNEW!
- Alat ganti stereng
- Tuil Berputar
- Rod/Topang PenstabilNEW!
- Kepala Rod IkatNEW!
- Sendi BebolaNEW!
- Sesendal Galas, Lengan Kawalan MelintangNEW!
- Sesendal Galas, PenstabilNEW!
- Rod pengikatNEW!
- Gear SterengNEW!
- Pam ServoNEW!
- Penstabil, CasisNEW!
- Skru Pembetulan KejatuhanNEW!
- Set Belo, SterengNEW!
- Sesendal Galas, Spring BilahNEW!
- Ampaian, PembezaanNEW!
- Ampaian, Topang GandarNEW!
- Rod SterengNEW!
- Pemegang, Ampaian Lengan Kawalan MelintangNEW!
- Sarung, Ampaian Lengan Kawalan MelintangNEW!
- Pemasangan SpringNEW!
- Aci Ikut, Badan AciNEW!
- Set Perkakas Pemasangan, Sendi BebolaNEW!
- Sendi, Turus SterengNEW!
- Aci SterengNEW!
- Ampaian, Rod Penggandingan PenstabilNEW!
- Lengan PelahuNEW!
- Ampaian, Gandar RasukNEW!
- Ampaian, Spring BilahNEW!
- Pengapit SpringNEW!
- Tuil SterengNEW!
- Adang Aci, Pam ServoNEW!
- Penampan Hentakan, Gandar PandakNEW!
- Sesendal, Ampaian SpringNEW!
- Alat ganti elektrik
- Palam PencucuhNEW!
- Sensor ABSNEW!
- Pam Bahan ApiNEW!
- Gelung PencucuhNEW!
- Sensor Lokasi Aci Engkol
- Sensor, Suhu Bahan PenyejukNEW!
- GeneratorNEW!
- Sensor LambdaNEW!
- PenghidupNEW!
- Palam Bara
- Sensor, Tekanan MinyakNEW!
- Meter Aliran Udara
- Sensor Tekanan PenggalakNEW!
- Set Kabel PencucuhNEW!
- Suis Lampu BrekNEW!
- Pengatur GeneratorNEW!
- Suis, Lampu UndurNEW!
- Penutup Pengagih PencucuhNEW!
- Rotor Pengagih PencucuhNEW!
- Sensor, Suhu Udara SedutanNEW!
- Sensor KetukanNEW!
- Injap Kawalan Melahu, Bekalan UdaraNEW!
- Sensor, Kedudukan PendikitNEW!
- Sensor, KelajuanNEW!
- Pemegang, Berus KarbonNEW!
- Modul PencucuhNEW!
- Sensor, Suhu MinyakNEW!
- Suis Magnet, PenghidupNEW!
- Pam Tekanan TinggiNEW!
- Kotak Gear Roda Bebas, PenghidupNEW!
- Berus Karbon, PenghidupNEW!
- Set Elektrik, Pengganding TundaNEW!
- Pam Air Pembersihan, Pembersihan CerminNEW!
- Geganti Kelip AmaranNEW!
- Penerus, GeneratorNEW!
- Pinan, PenghidupNEW!
- Palam Bara, Pemanas elektrikNEW!
- Peranti Kawalan, Sistem PencucuhanNEW!
- Kamera Undur, Bantuan Letak KeretaNEW!
- Pemegang LampuNEW!
- Bateri Penghidup
- Battery booster/Jump starter
- Kabel Bantuan Penghidup
- Pengecas Bateri
- Perlindungan
- Sensor/suis(pemancar)
- Alat ganti terma
- TermostatNEW!
- Penyejuk Enjin
- Pam AirNEW!
- Kapasitor, Sistem Penyaman Udara
- Penutup Radiator
- Tiub RadiatorNEW!
- Tangki pengembanganNEW!
- Perintang, Kipas DalamanNEW!
- Pemampat Penyaman UdaraNEW!
- Kipas RadiatorNEW!
- Penyejuk Antara
- Penyejuk MinyakNEW!
- PengeringNEW!
- Klac, Kipas RadiatorNEW!
- Sensor arasNEW!
- Gasket, Injap AGRNEW!
- Gasket, Perumah TermostatNEW!
- Gasket, Pam AirNEW!
- AntibekuNEW!
- Elemen Pemanasan, Sistem Prapemanasan EnjinNEW!
- Air conditioning bearing
- Oring set
- R134a
- Enjin
- Skru Kunci, Penakung MinyakNEW!
- Gasket, Penutup Kepala SilinderNEW!
- Gasket, Kepala SilinderNEW!
- Adang Aci, Aci EngkolNEW!
- Set Gasket, Kepala SilinderNEW!
- Set Skru Kepala SilinderNEW!
- Set Rantai PemasaanNEW!
- Gasket, Manifold PenyedutanNEW!
- Set Gasket, Penutup Kepala SilinderNEW!
- Gasket, Manifold EkzosNEW!
- Tiub UdaraNEW!
- Set Cincin OmbohNEW!
- Gasket, Penakung MinyakNEW!
- Takal, Aci EngkolNEW!
- Set Gasket, Batang InjapNEW!
- Kit Pemasangan, PengecasNEW!
- Kelepak EkzosNEW!
- Galas Rod PenyambungNEW!
- Injap MasukNEW!
- Set Gasket, Kotak EngkolNEW!
- Galas Aci EngkolNEW!
- Tapet InjapNEW!
- Pam MinyakNEW!
- Set Penuh Gasket, EnjinNEW!
- Cincin Sesendal, Batang InjapNEW!
- Panduan injapNEW!
- Gasket, Penyejuk MinyakNEW!
- Rantai PemasaanNEW!
- Gasket, Perumah Manifold PenyedutanNEW!
- Penegang, Rantai PemasaanNEW!
- Set Gasket, Manifold PenyedutanNEW!
- Aci SesondolNEW!
- Gasket, Sambungan Pengisi MinyakNEW!
- Kepala SilinderNEW!
- Adang Aci, Aci SesondolNEW!
- Set Galas Hujung BesarNEW!
- Set Landas Panduan, Rantai PemasaanNEW!
- Gasket, Perumah KawalanNEW!
- Set galas aci engkolNEW!
- Gasket, Pengalihudaraan Kotak EngkolNEW!
- OmbohNEW!
- Gasket, Penutup Perumah KawalanNEW!
- Cakera Jarak, Aci EngkolNEW!
- Set Gasket, Pacuan TambahanNEW!
- Pemasangan Teras, PemuatNEW!
- Sesendal Galas, Rod PenyambungNEW!
- Set Aci SesondolNEW!
- Landas Tegangan, Rantai PemasaanNEW!
- Adang Aci, Aci SesondolNEW!
- Set tuil condong, kawalan enjinNEW!
- Tiub Pelincir, Pelinciran SesondolNEW!
- Adang Aci, Pam SuntikanNEW!
- Gasket, Salur Masuk Turbin (Pemuat)NEW!
- Aci EngkolNEW!
- Galas Penggerak, GeneratorNEW!
- Alat ganti sistem pemacu
- Set Galas RodaNEW!
- Sendi, Aci PacuanNEW!
- Belo, Aci PacuanNEW!
- Aci PacuanNEW!
- Adang Aci, PembezaanNEW!
- Adang Aci, Aci PacuanNEW!
- Galas, Galas Tengah Aci SendiNEW!
- Adang Aci, Hab RodaNEW!
- Adang Aci, Gear ManualNEW!
- Gandar Pandak, Ampaian RodaNEW!
- Bintang Tripod, Aci PacuanNEW!
- Aci PacuanNEW!
- Galas, Aci PacuanNEW!
- Pelincir, Klac pelbagai plat - pacuan empat rodaNEW!
- Adang Aci, Gear PengagihNEW!
- Gandingan UniversalNEW!
- Pemegangan, Galas Tengah Aci SendiNEW!
- Enjin, sistem gear dan cagak sistem pemacu
- Sistem keselamatan
- Peralatan dalaman kereta
- Pengatur tingkap
- Sistem Ekzos
- Penyenyap BelakangNEW!
- Penyenyap TengahNEW!
- Gasket, Paip EkzosNEW!
- Sabuk Getah, Sistem EkzosNEW!
- Paip EkzosNEW!
- Konversi Pengubah BermangkinNEW!
- Kit Pemasangan, PengecasNEW!
- Cincin Sesendal, Paip EkzosNEW!
- Penyenyap DepanNEW!
- Gasket, Talian Injap AGRNEW!
- Gasket, Salur Keluar Minyak (Pemuat)NEW!
- Pemasangan Teras, PemuatNEW!
- Set Pemasangan, Sistem EkzosNEW!
- Injap, AGR Kawalan EkzosNEW!
- Set Gasket, Manifold EkzosNEW!
- Injap Pertukaran, Kelepak EkzosNEW!
- Set Pembaikan Kabel, Injap AGRNEW!
- Alat ganti sistem bahan api
- Kunci, Tangki Bahan ApiNEW!
- Injap EGRNEW!
- Muncung Suntikan Bahan ApiNEW!
- Sensor, Tekanan Bahan ApiNEW!
- Cincin Sesendal, Pemegang MuncungNEW!
- Sensor KetukanNEW!
- Cincin Sesendal, Injap SuntikanNEW!
- Injap Kawalan Tekanan, Sistem Rel SepunyaNEW!
- MuncungNEW!
- Pam Bahan ApiNEW!
- Pam SuntikanNEW!
- Injap, Sistem SuntikanNEW!
- Peralatan bengkel
- Lain-lain
- GasketNEW!
- Set Sesentuh, Pengagih PencucuhNEW!
- Klip PemegangNEW!
- Paip Jarak, Penyerap KejutanNEW!
- Minyak EnjinNEW!
- Elemen Kedudukan, Pam SuntikanNEW!
- Set Pemasangan, Peranti PencucuhanNEW!
- Cuping, Blok SpringNEW!
- Ampaian, Ampaian SpringNEW!
- Plat Haus, Spring BilahNEW!
- Penampan, Omboh Berpusing Belo AmpaianNEW!
- Paip JarakNEW!
- Badan MuncungNEW!
- Minyak Gear AutomatikNEW!
- Gasket, Salur Masuk Minyak (Pemuat)NEW!
- Minyak Gear AutomatikNEW!
- Cincin OmbohNEW!
- Set Tali KipasNEW!
- Set Aksesori, Lengan JumpelangNEW!
- Set Gasket, Manifold Penyedutan/EkzosNEW!
- Lengan AyunNEW!
- Set Sesendal Kitaran SilinderNEW!
- Bolt Bebola, Rod IkatNEW!
- Sesendal, JumpelangNEW!
- Cat Gabungan Kenderaan
- Hon Penggera
- Spring gas
- Sistem pemanasan
- Aksesori
- Accessories for mobile phones
- Aksesori
- BOOSTER, Emergency Aid - Battery Bank
- Bekas Air
- Berus Pencuci Kenderaan
- Car flags
- Car seat covers
- Children's goods
- Clamps and ties
- Covers for car documents
- Fefrigerators and cooling boxes
- First aid kit
- Flashlights, lamps
- Interior freshener
- Kanister
- Lamps
- Lamps LED
- Lights XENON
- Mobile phone charger- powerbank
- Multimedia
- Parking assistant system
- Parking clock
- Pelekat
- Pemadam Api
- Pemantul
- Pengikis Ais
- Pengorek
- Penyala Rokok
- Pets
- Pita Penebat
- Radio
- Rudder cover
- Span
- Stickers and car identification
- Tali Tunda
- Tape
- Tint films for car
- Vacuum Cleaners
- Warn jacket
- Warning triangle
- Wipes
- Bearing universal
- Kimia dan produk penjagaan kosmetik
Bahagian () ini tidak wujud dalam pangkalan data kami atau mempunyai nama yang berbeza.
Tunjukkan semua alat ganti
Tunjukkan semua alat ganti
- Anda juga mungkin sukakan
- Sistem pemanasan
- Sistem Prapemanasan Enjin
- Sistem Prapemanasan Enjin untuk Nissan